Waste Cone With Flow Display
The FLC-FC cone flow meter is an advanced application of differential pressure technology. Its characterization of the flow profile enables reliable measurement. Cone (flanged) TO WASTE (with back pressure) Valve TEST LINE PIPE AND FITTINGS. Gases and steam Graphical 2-line LCD display Magnet stick operation — Configuration. The Difference Between Pressure and Flow - Duration: 7:34.
The FLC-FC cone flow meter is an advanced application of differential pressure technology. Its characterization of the flow profile enables reliable measurement even under the most difficult conditions.Thanks to its design, the cone flow meter is ideally suited for applications with limited mounting space. It offers a wide and stable turndown and, at the same time, a high accuracy and repeatability.The FLC-FC cone flow meter is produced in accordance with the ISO 5167 reference standard. Part 5 of this standard covers the topics of installation and operating conditions and gives further information for calculating the flow rate and its uncertainties.Low maintenance effortThe conical primary element has been designed so that its edges are protected from particles in the medium. Therefore, the cone flow meter has a very long service life, even in applications with abrasive media.
Waste Cone Dimensions
The VM V-Cone System has an advanced differential pressure flow sensing design. The flow meter features built-in flow conditioning for superior accuracy. The VM V-Cone is the ideal new or retrofit flow meter for multiple clean water and wastewater treatment applications.The McCrometer VM V-Cone System. Measurement SimplifiedWith its built-in flow conditioning technology, the V-Cone also can be placed in relatively close proximity to elbows, valves, pumps, pipe U's, etc., where other flow measurement technologies would be impractical or inaccurate.VM V-Cone System's pre-packaged, built-in 3-way valve isolates the transmitter from the process fluid flow for easy maintenance. No need to shut down the pipeline. The flow meter arrives wet-flow calibrated direct from the factory. The ready-to-install VM V-Cone System reduces many headaches of adding a flow meter to most flow installations.Can We Help You With More Information or a Free Quote?
Waste Cone With Flow Display Stand
FEATURES AND BENEFITS: The VM V-Cone System assures long-term performance because there are no moving parts to repair or replace. Once installed, the primary element rarely, if ever, needs to be removed from service. This leaves only the flow transmitter with the occasional recalibration over its lifetime. The V-Cone family of flow meters have a proven long life with installations exceeding 20 years without the need to be removed or re-calibrated. System accuracy of ±0.5% of rate.
Flow range: 10:1. Installation: Typically 0-3 diameters upstream and 0-1 diameter downstream. No parts to wear so little maintenance required. HART ® and Digital Protocols.
Totalizer pulse and linear 4-20mA outputs. 3-way manifold for isolating the transmitter. Displays both rate of flow and total flow. Rate and total functions are independent of each other allowing for many different combinations of flow units. TECHNICAL SPECIFICATIONS:The VM V-Cone Water and Waste Water Flow Meter System consists of a flanged Flow Tube, Flow Transmitter and Flow Indicator.
Waste Cone With Flow Display Systems
The Flow Transmitter detects flow and transmits a 4-20mA signal proportional to the flow rate. The Flow Indicator converts the signal into a flow Rate and Total, displayed on an LED display. The flow indicator is either integrated to the flow transmitter or remote mounted from the meter body. The Flow Indicator outputs an auxiliary 4-20 mA signal and an open collector transistor alarm pulse assignable to Rate or Total. A 3-way-valve isolation manifold is standard.PERFORMANCEAccuracy: ±0.5% of reading over standard flow rangeRange: to see dimension chartHead Loss.