• This Site Can't Be Reached Chromebook

There might be a problem with your DNS servers of the. A computer by default uses the ISP's DNS servers. You can manually configure your DNS servers. It is free and usually better than your ISP.

Go to Control Panel → Network and Internet → Network and Sharing Centre. Click on Change Adapter settings. Right click on your connection icon (Wireless Network Connection or Local Area Connection) and select properties. Select Internet protocol version 4.

Click on 'Use the following DNSserver address' and type either of the two DNS given below.Google Public DNS Preferred DNS server: 8.8.8.8Alternate DNS server: 8.8.4.4OpenDNS Preferred DNS server: 208.67.222.222Alternate DNS server: 208.67.220.220. Steps to manually configure DNS:.You can access Network and Sharing center by right clicking on the Network icon on the taskbar.Now choose adapter settings from the side menu.This will give you a list of the available network adapters in the system. From them right click on the adapter you are using to connect to the internet now and choose properties option.In the networking tab choose ‘Internet Protocol Version 4 (TCP/IPv4)’.Now you can see the properties dialogue box showing the properties of IPV4. Here you need to change some properties.Select ‘use the following DNS address’ option. Now fill the following fields as given here.Preferred DNS server: 208.67.222.222Alternate DNS server: 208.67.220.220This is an available.

This Site Can't Be Reached Chromebook

1. The site can't be Reached, Server IP address could not be found SOLVED - Duration: 3:54. StayAlive 4 Life 33,372 views. How to fix 'failed-network error' problem /google chrome/ extension.
2. Jun 17, 2016 - That's the reason why you couldn't visit specific sites. In order to fix this connection refused error, you will have to remove all caches on your.

May be your internet provider or your administrator has blocked youtube access. Thus using VPN you by pass your ISP or admins firewall setting.

You may also use.After filling these fields. Check the ‘validate settings upon exit’ option. Now click OK.You have to add this DNS server address in the router configuration also (by referring the router manual for more information).Refer:If none of this works, then open command prompt(Run as Administrator) and run these: ipconfig /flushdnsipconfig /registerdnsipconfig /releaseipconfig /renewNETSH winsock reset catalogNETSH int ipv4 reset reset.logNETSH int ipv6 reset reset.logExitHopefully that fixes it, if its still not fixed there is a chance that its a NIC related issue(driver update or h/w).Also FYI, this has a thread on Microsoft community.